Potential uses for this chip include:
The LF operating characteristics may offer advantages in environments with high moisture content or metallic interference where HF/UHF performance degrades. The read/write capability supports re-programmable ID applications versus one-time-programmable alternatives.
","buying_guide":"Questions to verify with the supplier:
The ATA5577M1 is a low-frequency (LF) RFID read/write transponder IDIC operating at 125 kHz. It complies with ISO/IEC 18000-2 for LF RFID air interface and supports proprietary protocols including Manchester and Bi-phase encoding schemes. The chip is powered via electromagnetic coupling from the reader field, using the received carrier frequency for both energy harvesting and clock extraction.
The device functions as a contactless read/write memory. Data is transmitted from tag to reader via load modulation, where the integrated coil current is modulated to create detectable changes in the reader antenna field. Anti-collision is not natively supported by the base ATA5577M1 architecture; single-tag or controlled read environments are typical. Memory architecture consists of 330-bit EEPROM organized into 10 blocks of 33 bits each, with block 0 factory-programmed as a traceability ID.
","programming_notes":"Reader compatibility: The ATA5577M1 requires compatible 125 kHz LF readers capable of generating sufficient field strength for write operations, which demand more energy than reads. Verify reader support for ATA5577M1-specific command timing and modulation depth.
Memory layout: The 330-bit EEPROM comprises 10 blocks × 33 bits. Block 0 contains manufacturer traceability data and is not user-programmable. User data spans blocks 1–7. Blocks may be protected via configuration bits in the master block.
Key command families: Standard operations include READ and WRITE commands. The chip supports direct access mode and password-protected operations depending on configuration. The READ command retrieves block contents; WRITE programs data with required field strength typically higher than standby or read levels.
Configuration gotchas: The master block (block 0 page 1 or equivalent configuration area) sets modulation type, data rate, and block-lock bits. Incorrect configuration can render the tag unreadable by standard readers. The XTAL option (if populated on module) versus resonant LC operation affects frequency stability and read range.
Security limitations: No cryptographic authentication is implemented. Password protection, where available, operates as a simple access control mechanism rather than robust security. Cloning of unprotected tags is technically feasible.
Typical pitfalls: Write distance is substantially shorter than read distance; attempting writes at maximum read range fails. Configuration changes affecting modulation format can lock out readers expecting alternate encodings. Power-on reset timing must be observed between consecutive operations.
"},"og_image_url":"https://rfid-datasheet.com/og/chip/ata5577m1","canonical_url":"https://rfid-datasheet.com/chip/ata5577m1"}}