Potential use cases supported by the chip's feature set:
Part Number Verification: Confirm exact memory density suffix (xxx indicates EEPROM size variants in the series). Verify operating temperature grade and package type match application requirements.
Documentation: Request current datasheet revision and errata notification list. Confirm application note availability for antenna design and energy harvesting implementation.
Security Provisioning: Clarify whether devices are delivered with default keys, pre-personalized keys, or blank requiring secure in-field provisioning. Establish key injection process and custody chain if required.
Sample Validation: Request engineering samples for RF performance characterization with target antenna geometry. Verify read range, energy harvesting output, and authentication latency under application-specific coupling conditions.
Packaging: Confirm delivered form factor (wafer, bumped die, or module) and handling requirements for assembly integration.
Comparable devices for evaluation include ST25TA02KB and related ST25TVxxxK variants with extended tamper-detection features.
","how_it_works":"The STMicroelectronics ST25TAxxxK is an NFC Forum Type 4 tag IC that operates at 13.56 MHz using the ISO/IEC 14443 Type A RF interface. It employs amplitude-shift keying (ASK) modulation with Miller coding for reader-to-card communication and load modulation with Manchester coding for card-to-reader responses, supporting both 106 kbit/s base data rate and higher bit rates up to 848 kbit/s as defined by the Type 4 specification.
The anti-collision mechanism follows the ISO/IEC 14443-3 Type A cascading selection procedure, using unique 4-byte UID (single size) or 7-byte UID (double size) for card selection. Once selected, communication transitions to the ISO/IEC 14443-4 transport protocol (T=CL) block-oriented frame structure.
Memory architecture implements the Type 4 Tag Operation specification, presenting a file system with Capability Container (CC) file, NDEF file(s), and proprietary system files. The chip integrates AES-128 cryptography for authentication and secure messaging operations. Energy harvesting capability enables powering external low-power circuitry from the RF field.
","programming_notes":"Reader Compatibility: Requires ISO/IEC 14443 Type A compliant reader supporting NFC Forum Type 4 tag operation. Readers must implement T=CL frame structure for device activation and protocol management.
File System Structure: Type 4 compliant memory layout requires proper Capability Container (CC) initialization at offset 0x0000. NDEF message files must be declared in the CC with correct file size and read/write access conditions. System files for configuration and security are manufacturer-proprietary.
Security Operations: AES-128 authentication uses challenge-response protocol. Key establishment requires secure key provisioning during manufacturing or in trusted environment. WRITE operations to protected files require prior successful authentication.
Energy Harvesting: Output available when sufficient RF field strength present; exact voltage/current characteristics vary by antenna design and coupling factor. System design must account for field-dependent power availability.
Pitfalls: Type 4 tag operation differs significantly from Type 1/2/5 commands—READ BINARY and UPDATE BINARY are used rather than READ/WRITE page-oriented commands. File selection must precede data access. Timeout windows for protocol management must be observed per ISO/IEC 14443-4.
"},"og_image_url":"https://rfid-datasheet.com/og/chip/st25taxxxk","canonical_url":"https://rfid-datasheet.com/chip/st25taxxxk"}}